Exceptinct

DeWalt DW871 Information The DeWalt DW871 is a heavy-duty chop saw that is designed for making accurate cuts on a variety of materials, including wood, metal, and plastics. It features a powerful 2200-watt motor that delivers a no-load speed of 3800 RPM, making it capable of cutting through even the toughest materials. The saw also has a large 355mm blade that provides a generous cutting capacity. Image of DeWalt DW871 chop saw Specifications

Güde GAK 710 TELE Information Introduction The Güde GAK 710 TELE is an electric pole saw that is designed for cutting branches and limbs up to 5 meters high. It has a powerful 710W motor and a 20 cm guide bar, making it ideal for both professional and home use. The pole saw is also equipped with a telescopic shaft that can be extended from 2.29 to 2.89 meters, allowing you to reach even the highest branches. Image

Metabo SSW 650 Information The Metabo SSW 650 is a powerful impact wrench that is designed for demanding screwdriving applications. It features a high torque of 600 Nm, which allows it to loosen and tighten even the most stubborn nuts and bolts. The SSW 650 also features Variospeed (V) Electronics, which allows you to customize the speed and torque output to suit the specific application. This makes it a versatile tool that can be used for a wide range of tasks. Image: Specifications:

TFA 30.3215.02 Information the information about the TFA 30.3215.02: Introduction The TFA 30.3215.02 is a wireless temperature and humidity sensor that can be used with a variety of TFA weather stations. It is a small, white plastic device that measures 45 x 20 x 108 mm and weighs 45 g. The sensor is powered by two AAA batteries, which are not included.

Perel E305DO2 Information The Perel E305DO2 is an analog timer that can be used for both indoor and outdoor applications. It has a maximum power rating of 3680 W and can be programmed to switch on or off any electrical appliance at set intervals. The timer has a 24-hour range and can be set to activate or deactivate up to 48 times per day. It is also water-resistant to IP44 standards, making it suitable for use in wet or humid environments. Image of Perel E305DO2 Specifications

ATIKA BKS 45 Information The ATIKA BKS 45 is a powerful and versatile petrol chainsaw that is ideal for a variety of tasks, including felling trees, limbing, and bucking. It is powered by a 1.8 kW (2.5 hp) engine that delivers plenty of power for even the most demanding jobs. The chainsaw features a 45 cm (18") Oregon chain and bar, which provides a long reach and makes it easy to cut through even large logs. The BKS 45 also features a number of safety features, including a kickback protection system and a chain brake. Image of ATIKA BKS 45 chainsaw Specifications

Hilti TE 500-22 Information The Hilti TE 500-22 is a cordless chipping hammer that delivers uncompromising performance on a wide range of demolition and breaking applications. It features a powerful 5.2 Ah Nuron battery that provides up to 30 minutes of runtime on a single charge, and a high-performance motor that delivers up to 3300 impacts per minute. The TE 500-22 also features an Active Vibration Reduction (AVR) system that helps to reduce user fatigue, and a dust-sealed design that keeps the tool working in even the most dusty environments. Image: Specifications:

Güde Airpower 240/10/5 Information the information about the Güde Airpower 240/10/5: Introduction The Güde Airpower 240/10/5 is a portable, oil-free compressor that is perfect for a variety of home and workshop tasks. It is powered by a 1.1 kW motor and has a maximum pressure of 10 bar. The compressor features a two-cylinder design that provides quiet operation, even at high pressure. It also has a number of other features that make it a versatile and user-friendly tool, including a pressure switch, a pressure gauge, and a quick-release coupling.

Skil 7110 AA Information the information about the Skil 7110 AA: Introduction The Skil 7110 AA is a powerful and versatile delta sander that is ideal for a variety of woodworking projects. It features a 240-watt motor that provides plenty of power for sanding even the toughest materials, and a large sanding pad that allows you to cover a lot of surface area quickly. The sander also has a variable speed control so you can adjust the speed to the task at hand, and a dust collection port that helps to keep your workspace clean.

Milwaukee M18 Fuel 2861-21 Information Introduction The Milwaukee M18 FUEL 1/2" Mid-Torque Impact Wrench with Friction Ring (2861-21) is a powerful and versatile tool that is perfect for a variety of applications. It delivers up to 600 ft-lbs of nut-busting torque and 450 ft-lbs of fastening torque, making it ideal for loosening and tightening lug nuts, bolts, and other fasteners. The tool features a 3-Mode DRIVE CONTROL™ system that allows you to customize the speed and power output for different applications, and it also has a REDLINK PLUS™ intelligence system that prevents the tool from overloading or overheating. The M18 FUEL 1/2" Mid-Torque Impact Wrench is backed by a Milwaukee 5-year warranty, so you can be confident that it will last for years to come. Image

Pro'sKit MT-3266 Information The Pro'sKit MT-3266 is a versatile digital clamp meter that is designed for measuring AC current, AC/DC voltage, resistance, and performing diode check and continuity test. It is a reliable and affordable tool that is perfect for electricians, hobbyists, and DIYers. Introduction The Pro'sKit MT-3266 features a 3 1/2-digit LCD display with a maximum reading of 1999 counts. It has a measurement accuracy of 0.8%, making it a reliable tool for precision measurements. The meter also features a number of additional functions, including data hold, low battery indication, and auto power off.

Cocraft HG 70 Information The Cocraft HG 70 is a 25-watt hot glue gun that is perfect for a variety of home improvement and crafting projects. It is easy to use and has a number of features that make it a great choice for both beginners and experienced users. Introduction The Cocraft HG 70 is a small, lightweight gun that is easy to grip and control. It has a large trigger that makes it easy to apply the glue, and a built-in stand that keeps the gun upright when not in use. The gun heats up quickly, typically in about 3-5 minutes, and it has a clear window that allows you to see how much glue is left.

Bosch PDA 240 E Information the information about the Bosch PDA 240 E: Introduction The Bosch PDA 240 E is a powerful and versatile delta sander that is ideal for a variety of woodworking and metalworking tasks. It features a powerful 240-watt motor that delivers up to 12,000 oscillations per minute, making it ideal for fast and efficient sanding. The PDA 240 E also features a comfortable grip and a lightweight design, making it easy to use for extended periods of time.

Metabo KHE 2860 Quick Information the quick information about the Metabo KHE 2860 Quick: Intro The Metabo KHE 2860 Quick is a powerful and versatile combination hammer that is perfect for a variety of tasks. It features a 3-function design that allows you to hammer drill, drill, and chisel, making it an essential tool for any home or workshop. The KHE 2860 Quick is powered by a Metabo Marathon motor with dust protection, which ensures long-lasting performance. It also features Metabo Quick chuck technology, which allows you to quickly and easily change between the SDS-Plus hammer chuck and the keyless chuck.

Güde Kompressor Airpower 200/10/5 TY Information Güde Airpower 200/10/5 TY is a small, portable, and oil-free compressor that is perfect for a variety of home and workshop tasks. It has a 5-liter tank, a 1100-watt motor, and can reach a maximum pressure of 10 bar. The compressor comes with a 5-meter spiral hose, an air chuck, and an inflation gun. Image Full specifications

Craftsman CMECSP610 Information the information about the Craftsman CMECSP610: Intro The Craftsman CMECSP610 is a 2-in-1 electric chainsaw and pole saw that offers a versatile and powerful way to tackle a variety of cutting tasks. With its 8-amp motor and 10-inch bar and chain, the CMECSP610 can easily handle branches up to 12 inches in diameter. The included extension pole gives you up to a 15-foot reach, making it ideal for cutting overhead branches or reaching into tight spaces.

Güde W 520/5.5 T UG Information the information about the Güde W 520/5.5 T UG: Introduction The Güde W 520/5.5 T UG is a powerful and versatile log splitter that is perfect for homeowners and professionals alike. It features a powerful 5.5 kW motor that can split logs up to 52 cm long and 25 cm in diameter. The splitter also has a number of features that make it easy to use, including a side handle, a safety switch, and a built-in transport wheel.

Fini Rotar 20 Information The Fini Rotar 20 is a rotary screw air compressor that is designed for professional use. It is a powerful and reliable compressor that can provide a continuous flow of air for a variety of applications. Introduction The Fini Rotar 20 is powered by a 15 kW motor and has a maximum pressure of 10 bar. It can deliver a maximum flow rate of 1950 l/min, which makes it suitable for a wide range of applications, including:

Wagner SprayTech FLEXiO 570 Information The Wagner SprayTech FLEXiO 570 is a handheld HVLP paint sprayer that is designed for both indoor and outdoor use. It is capable of spraying unthinned paints and stains, making it a versatile tool for a variety of projects. Image: Specifications:

Worx WX382.1 Information The Worx WX382.1 is a 12V cordless drill/driver/hammer drill that is lightweight and compact, making it easy to maneuver in tight spaces. It has a brushless motor that provides more power and runtime than a brushed motor, and it also features a hammer function for drilling into concrete and masonry. The WX382.1 comes with two interchangeable chucks, one for ¼" hex bits and one for 5/16" hex bits, so you can use it for a variety of applications. It also has a variable speed trigger and a two-speed gearbox, so you can adjust the speed and torque to the task at hand. Image of Worx WX382.1 drill Specifications

Einhell BT-OS 150 Information The Einhell BT-OS 150 is a 150W orbital sander that is perfect for a variety of sanding tasks around the home. It features a powerful motor that delivers smooth, even sanding results, and a variable speed control that allows you to adjust the sanding speed to suit the task at hand. The sander also has a dust extraction port that helps to keep your work area clean. Introduction The Einhell BT-OS 150 is a versatile orbital sander that can be used for a variety of tasks, including sanding wood, metal, and plastic. It is powered by a 150W motor that delivers smooth, even sanding results. The sander also has a variable speed control that allows you to adjust the sanding speed to suit the task at hand.

Makita 6261DWPE Information The Makita 6261DWPE is a 9.6V NiCd cordless drill/driver that is ideal for light-duty applications. It features a compact design with a reduced body length of only 7-9/16 inches, making it easy to maneuver in tight spaces. The drill/driver also has a single sleeve keyless chuck for easy bit installation and removal. Image of Makita 6261DWPE cordless drill/driver Specifications

YSI EXO GO Information The YSI EXO GO is a rugged, compact device that allows for wireless communication between an EXO Sonde and a Windows or Android device running KorEXO Software for sampling, profiling, and monitoring applications. The portability of EXO GO frees up your hands in the field, and on-the-spot GPS coordinates and barometric pressure are viewed through the newest KorEXO Software running on both laptops and tablets. The device is IP-67 rated and highly ruggedized to withstand drops, drips, and dunks! Image of YSI EXO GO device Specifications

Velleman DVM9915 Information the information about the Velleman DVM9915 3D printer: Introduction The Velleman DVM9915 is a budget-friendly 3D printer that offers a good range of features for the price. It is a FDM (Fused Deposition Modeling) printer, which means that it builds objects by extruding molten plastic. The DVM9915 has a build volume of 220 x 220 x 250 mm, which is enough to print most small to medium-sized objects. It also has a heated bed, which allows you to print with a variety of materials, including PLA, ABS, and PETG.

Makita BFL082F Information The Makita BFL082F is a cordless impact wrench that is designed for high-torque applications. It is powered by a 18V LXT lithium-ion battery and has a maximum torque of 1,620 ft-lbs. The BFL082F features a variable speed trigger, a forward/reverse switch, and a built-in LED light. It is also USB programmable, which allows you to customize the RPM and directional settings. Specifications

Metabo MT 18 LTX BL QSL Information Introduction The Metabo MT 18 LTX BL QSL is a cordless multi-tool that is designed for professional use. It is powered by a 18-volt Li-Power battery pack and has a variable orbital frequency of 8,000 to 20,000 rpm. The tool is compatible with Starlock and StarlockPlus accessories, and it comes with a number of features that make it ideal for a variety of applications. Image

Tanaka THT-2000SLB Information Introduction The Tanaka THT-2000SLB is a high-performance home theater receiver that offers a wide range of features and capabilities. It features a powerful amplifier, support for Dolby Atmos and DTS:X surround sound, and a variety of connectivity options. The THT-2000SLB is perfect for anyone who wants to create a truly immersive home theater experience. Specifications

Fellowes Voyager A3 Information the information about the Fellowes Voyager A3 laminator: Introduction The Fellowes Voyager A3 laminator is a high-quality, professional-grade laminator that is perfect for businesses and schools. It is capable of laminating documents up to A3 size, and it features an automatic temperature sensor that ensures that your documents are laminated evenly every time. The Voyager A3 also comes with a number of convenient features, such as a built-in cutter, a peel-off roller, and a carrying handle.

Telwin Force 125 954194 Information The Telwin Force 125 954194 is a lightweight and portable inverter welding machine that is perfect for DIYers and hobbyists. It is powered by a 120V outlet and can weld mild steel, stainless steel, and aluminum up to 1/8" thick. The Force 125 features a digital display that shows the current welding setting, as well as a hot start and arc force function for improved welding performance. It also has a built-in carrying handle for easy transport. Here is a table of the full specifications of the Telwin Force 125 954194: Specification Value Input Voltage 120V Output Current 20-125A Duty Cycle 60% @ 125A Voltage Range 19-26V Arc Voltage 22-28V No Load Voltage 60V Weight 42 lbs Dimensions 19.3 x 8.3 x 16.5 in Here are some of the features of the Telwin Force 125 954194:

AEG SB2-650 Information The AEG SB2-650 is a powerful and versatile drill machine that can handle a variety of tasks. It features a 650W motor that provides plenty of power for drilling through wood, metal, and plastic. The drill also has a 2-speed gearbox that allows you to choose the right speed for the job at hand. For precision drilling, the SB2-650 has a variable speed control and a 13mm keyed chuck. The drill is also equipped with a depth gauge for accurate drilling to a specific depth. Here is an overview of the AEG SB2-650's specifications: Motor power: 650W Chuck size: 13mm Speed range: 0-2,250/0-3,000 RPM Max. drilling diameter in wood: 30mm Max. drilling diameter in metal: 16mm Max. drilling diameter in concrete: 10mm Weight: 1.8kg

ORNO OR-CR-241 Information The ORNO OR-CR-241 is an ultra-flat passive infrared (PIR) motion sensor that can be used for automatic lighting control in indoor environments. It has a 360° detection angle and can be used with LED lighting. The sensor has two adjustable settings: the lighting time (TIME) and the sensitivity of the light intensity (LUX). The TIME setting can be adjusted from 10 seconds to 15 minutes, and the LUX setting can be adjusted from 3 lux to 2000 lux. The sensor also has a built-in daylight sensor that can be used to prevent the lights from turning on during the day. The ORNO OR-CR-241 is a white, surface-mount sensor that measures 115mm in diameter and 24.3mm in depth. It has a maximum load of 2000W and a maximum load of 500W for LED light sources. The sensor is IP20 rated, which means it is protected against dust and splashing water. It is also certified to ENEC and CE standards. The ORNO OR-CR-241 comes with a mounting bracket, screws, and an instruction manual. ...